Description
Surface mounting dimmer 230V a.c./50Hz, 3W to 1300W, for LED lamps Dimmable, capacitive and resistive loads, with a “Soft Start” function. It is controlled by a rotary potentiometer with push switch. Neutral is necessary.
The surface mounting dimmer PD-1300W is a 230V a.c./50Hz voltage regulator, specifically designed to fulfill the needs of indoor lighting adjustment, especially when alternative type of lamps such as lamps LED dimmable, economy lamps (dimmable CFL) and previous generation light bulbs, resistive or Halogen, are used.
The device is manufactured in accordance with Directives 2014/35 / EU, 2014/30 / EU and EN 60669-1: 2000, EN60669-2-1: 2002.
The device has two modes of operation: Trailing Edge Mode 1300W (default) and LED Mode 600W.
The dimmer mode changes by pressing the switch for more than 5 seconds. The mode is saved in the EEPROM memory, so it won’t be lost in case of power failure.
For its operation it has a potentiometer with push switch, for adjusting the power consumption, from 1% to 100%, and for turning the load ON or OFF.
It also has a trimmer for adjusting the lower limit.
One or more parallel buttons can be connected remotely.
Button’s function:
Instant pressing of the button, turns the load ON or OFF.
Continuous pressing, increases or decreases the light intensity.
Loads
Dimmable LED lamps, up to 6A peak, depending on the lamp.
Incandescent and halogen lamps.
Electronic transformers.
CAUTION: NO electromagnetic transformers.
