DM-2

Wall mounting dimmer 230V a.c./50Hz, Trailing Edge or LED Mode, for LED lamps Dimmable, capacitive and resistive loads, with electronic short-circuit protection, overload and overheating. It is controlled by a rotary potentiometer with push switch. Without neutral.

 

SKU:  200.0052

INSTRUCTIONS FOR USE:

Category:

Description

Wall mounting dimmer 230V a.c./50Hz, Trailing Edge or LED Mode, for LED lamps Dimmable, capacitive and resistive loads, with electronic short-circuit protection, overload and overheating. It is controlled by a rotary potentiometer with push switch. Without neutral.

The device is manufactured in accordance with Directives 2014/35 / EU, 2014/30 / EU and EN 60669-1: 2000, EN60669-2-1: 2002.

Handling

The device has two modes of operation: Trailing Edge Mode 400W (default) and LED Mode 150W.
The dimmer mode changes by pressing the switch for more than 5 seconds. The mode is saved in the EEPROM memory, so it won’t be lost in case of power failure.
It has a potentiometer with push switch, for adjusting the power consumption, from 1% to 100%, and for turning the load ON or OFF.
It also has a trimmer for adjusting the lower limit.
One or more parallel buttons can be connected remotely.
Button’s function:
Instant pressing of the button, turns the load ON or OFF.
Continuous pressing, increases or decreases the light intensity.

CAUTION: When the device is OFF, the power line is not isolated, but only the drive circuit.

Loads

Dimmable LED lamps up to 2A peak, depending on the lamp.
Incandescent and halogen lamps.
Electronic transformers, up to 300 VA.

CAUTION: NO electromagnetic transformers.

 

Connection

DM-2 sxedio en  

Specifications

Operating voltage: 230V AC 50Hz
Cross section 1 x 2.5 mm2 or 2 x 1.5 mm2
Load power 3-400W
Short-circuit / overload protection Electronic Protection
Operating temperature - 10 oC to + 60 oC
Maximum humidity 95%
Construction material ABS Plastic
Dimensions 80mm x 80mm x 57mm

Frames

Download all frames