DR-3

Motor speed regulator (Dimmer) 230V, up to 1000W, with minimum speed adjustment. It is provided with a rotary potentiometer.

SKU:  200.0008

INSTRUCTIONS FOR USE:

SKU: 200.0008 Category:

Description

Motor speed regulator (Dimmer) 230V, up to 1000W, with minimum speed adjustment. It is provided with a rotary potentiometer.

The DR-3 is a rail mounting dimmer 230V a.c./50Hz for controlling asynchronous single-phase motors operating approximately at 50-100% of rated speed, as it is for example motors in ventilation installations. It is necessary to control the lower speed of the electric motor in order to avoid overheating and damage.

It has a potentiometer that allows to adjust the speed to the desired point of the user, from a lower preset limit to the maximum.

The lower speed limit shall be adjusted with the trimmer provided by the device as follows:

Set the main potentiometer to the minimum, adjust the trimmer with the help of a small screwdriver, turn it to the right, until the point that the engine rotates well. Now the dimmer adjusts the engine speed from the lower speed limit to the maximum.

It is possible to connect an ON-OFF external switch, to turn ON or OFF the load.

CAUTION: The switch does not isolate the power line, only the drive circuit.

Wiring

DR-3 sxedio en

Specifications

Operating voltage: 230V AC 50Hz
Maximum load up to 1000W
Protection from short circuit / overload FUSE TUBE 5.2x20mm 5A / 250V
Operating temperature -10 °C to +60 °C
Maximum humidity 95%
Construction material ABS Plastic