Description
Flush mounting dimmer 230V a.c./50Hz, Trailing Edge or LED Mode, for LED lamps Dimmable, capacitive and resistive loads, with electronic short-circuit protection, overload and overheating. It is controlled remotely by an external, or more, push button. Without neutral.
The device is manufactured in accordance with Directives 2014/35 / EU, 2014/30 / EU and EN 60669-1: 2000, EN60669-2-1: 2002.
Handling
The device has two modes of operation: Trailing Edge Mode 400W (default) and LED Mode 150W.
The dimmer mode changes by pressing the button for more than 15 seconds. The mode is saved in the EEPROM memory, so it won’t be lost in case of power failure.
It has a trimmer for adjusting the lower limit.
One or more parallel buttons can be connected remotely, for adjusting the power consumption, from 1% to 100%, and for turning the load ON or OFF.
Button’s function:
Instant pressing of the button, turns the load ON or OFF.
Continuous pressing, increases or decreases the light intensity.
CAUTION: When the device is OFF, the power line is not isolated, but only the drive circuit.
Loads
Dimmable LED lamps up to 2A peak, depending on the lamp.
Incandescent and halogen lamps.
Electronic transformers, up to 300 VA.
CAUTION: NO electromagnetic transformers.
